|
Post by SCOTTY (Squad Leader) on Jan 1, 2012 21:56:42 GMT -5
Well I decided I should share how I made replica ops-core nvg retention cords. I'll start with what you will need. Take in mind I made this with no measurements ( I eye balled everything). materials- x2 tan bungies from open top mag pouches x2 of the smallest bungie cords you can find a package of shrink wraps super glue I purchased most of the materials from walmart. Step1. Measure the length of cord you will need to run from the helmet rail to your nvg mount. Step 2. Make a knot in one end of you're cord. Remove the bungie hook from the bungie cord. Insert the un-knotted end through the large end of the whole in the coil. Step 3. Cut a piece of large shrink wrap so it will cover the hook's coil and part of the cord. Then I used a lighter to shrink it. Step 4. Now glue the knot inside the coil and glue the shrink wrap to the coil and cord for added stability. Step 5. Run the un-knotted end of cord into the rail whole and tie a knot. Mount you rail and you're done.
|
|